Magnetizers for Magnetizing Multipolar Magnet Based Magnetos Required In Automobiles.

These Equipments work on the principle of Capacitor Discharge hence Creating Large Unidirectional Currents into small Magnetization Fixtures which gives rise to Magnetic Induction in the Permanent Magnets of Ferrite Alnico and rare Earths. As the magnetization head (fixture) is a very vital part of the Magnetizing Unit care is taken for its cooling.
There is a facility for sensing the Magnetic Flux after the Magnetization level in the Magneto at the first stage of the Magnetization itself thereby saving the time required for testing the Magneto separately for Saturation. Also provision is made for sensing the fixture temperature and Auto cutoff thereby saving the fixture from Burning due to heat generated in it. This facility gives a long life for the Magnetizing Fixture.
The Magnetizer Machines for such type of application come along with built in Air-conditioning systems, Direct on Line Flux Checking systems and Automation for loading and Unloading of work piece into the Magnetization Fixture.
Magnetizers are made as per Customer requirement in terms of Capacity and rate of Production.

Magnetizers for Magnetizing Permanent Magnets DC Motors

These equipments work on the Principle of Capacitor Discharge thereby generating Large Undirectional Currents into Coils and Fixtures which create Magnetization of Ferrite, Alnico or rare Earth Magnet based DC Motors.
Magnetizers are designed for a capacity ranging from 300 joules to 45000 joules with working voltages ranging from 300 v DC to 1500 v DC. Also the Working Duty Cycles are matched ranging from minimum of 3 sec. per pulse for Magnetizers of Capacity 300 joules to 3000 joules. Electronic Rapid Charge and Discharge Circuits make it possible to operate the Magnetizers at such a fast rate.
Microprocessor based Interfacing is possible for Automated and Semi Automated systems for fast production cycles in case of Loud Speakers, Magnetos in Automobiles, and Residual Current Circuit Brakers in Switch Gear Industry.
Magnetizers also can be designed to the Customer requirement with additional indications and controls for the Magnetization Fixtures.
Magntization Fixtures for two pole, four pole and 6 pole are Fabricated for different starter motors required in Automobiles and CNC Automatic Machines which are Magnetized after the Motors are Assembled. These help in very low rejections and very simple to magnetize.